G-011 RP-A3 Pressure Roller for Riso GR 3750 GR3790

To ensure consistent print quality and reliable feeding through your Riso, use a high-quality G-011 RP-A3 Pressure Roller. This part is essential to the Print Drum Assembly and works in conjunction with the Impression Cylinder, providing the proper pressure for transferring ink from the master onto the paper.

The Pressure Roller may become worn, flat, or glazed after extensive use, resulting in printing problems (faint prints, ink streaks, and/or feeding difficulties). To restore the printing functionality of your Riso GR series to its original state and prolong the life of your duplicator, replace the Roller with this durable replacement part.

• Part Number: G-011 / RP-A3
• Product Type: Pressure Roller / Impression Roller
• Condition: Brand New
• Compatible Printer Models:
  • Riso GR 3750
  • Riso GR 3790

1. Power Off: Always turn off the Riso duplicator and unplug the power cord before performing any maintenance.
2. Remove Print Drum: Open the front cover and carefully remove the print drum unit to access the internal components.
3. Handle with Care: Avoid touching the rubber surface of the new pressure roller with your bare hands. Oils and dirt from your skin can affect print quality.
4. Inspect the Area: Before installing the new roller, check the surrounding area for any paper scraps or debris and clean if necessary.
5. Secure Installation: Ensure the roller is properly seated and aligned according to the service manual instructions. Improper installation can cause noise or damage.
6. Test Run: After reassembling the machine, run a few test prints to confirm that print density and quality have been restored.

Riso GR3750 pressure roller

Riso GR3790 toner cartridge

RP-A3 pressure roller replacement

G-011 RP-A3 Pressure Roller for Riso GR 3750 GR3790 Images